The recording program should start automatically once the computer is turned on. If the program doesn’t open automatically after a few minutes, open Livestream Studio.

Which program do I have to start on the computer?

**Entry way**: normal light switch next to the main door and mirror.

**Studio 1**: The red button on the power strip on the main desk will turn on the studio lights (in addition to the cameras and main computer).

**Studio 2**: The red button close to the floor just next to the door will turn on the back studio lights. The red button on the bottom left side of the room will turn on the front studio lights. You will need to push both red buttons.

Where do I turn on the lights?

First of all, ensure that the windows are closed. If the noise comes from within the building, try to talk to the people to find a solution. If you are recording short videos, try to record during quiet periods. If you can’t reach a conclusion on your own, contact us and we will find a solution for you.

There is a lot of outside noise, what should I do?

To turn on the computer on the main desk, as well as the lights and the cameras in Studio 1, push the red button on the power strip on the main desk. Then, push  the button on the lower right hand on the back of the screen to turn on the computer.The code for the computer is 1818.

How to start the computer?

Wi-Fi network: Videohaus_guest

Password: Videohaus18

How to connect to Wi-Fi?

*Absolutely not*. Each piece of equipment is critical for the proper functioning of the studio and may not be removed under any circumstances. There are security cameras installed within the studio and visible as well as invisible security systems are in place.

Videohaus Support Center

arrivals & departures

Was this page helpful?

Contact Support

Videohaus Support Center

arrivals & departures

Was this page helpful?

Contact Support

Log in or sign up